Valere Power

Overview

Valere Power UPS, the reliable and high-performance uninterruptible power supply solutions by Valere Power, seamlessly integrate with Motadata AIOps to provide comprehensive monitoring and management capabilities. With this integration, organizations gain real-time visibility into the performance and health of their Valere Power UPS devices. Monitor critical UPS metrics such as battery status, load levels, and input/output voltage to ensure continuous and reliable power protection.

Prerequisites

Refer Adding network devices for monitoring to understand the prerequisites necessary for monitoring a network device.

List of Supported KPIs

Metrics	Description	Type
ping.min.latency.ms	Minimum latency (in milliseconds) observed during ping	Count
ping.received.packets	Number of packets received during ping	Count
ping.lost.packets	Number of packets lost during ping	Count
ping.max.latency.ms	Maximum latency (in milliseconds) observed during ping	Count
object.target	Target object identifier	String
ping.sent.packets	Number of packets sent during ping	Count
ping.packet.lost.percent	Percentage of packet loss during ping	Percent
ping.latency.ms	Average latency (in milliseconds) observed during ping	Count
system.oid	System Object Identifier	String
started.time.sec	Uptime in Seconds for the monitor	Count
started.time	Uptime of the monitor	String
object.name	Name of the monitor	String
system.location	Location of the monitor	String
system.description	Description of the monitor	String
correlation.metrics	Correlation metrics between network connections	String
network.connection.tcp.connections	Number of TCP connections	Count
network.connection.udp.connections	Number of UDP connections	Count
network.connection.udp.error.segments	Number of UDP error segments	Count
network.connection.tcp.error.segments	Number of TCP error segments	Count
network.connection.tcp.retransmitted.segments	Number of TCP retransmitted segments	Count
destination.ip	Destination IP address	String
destination.port	Destination port number	Count
network.connection.protocol	Protocol used for network connection	Count
network.connection.state	State of the network connection	String
source.ip	Source IP address	String
source.port	Source port number	Count
interface.sent.discard.packets	Number of discarded packets sent on the interface	Count
interface.in.packets	Number of incoming packets on the interface	Count
interface.packets	Number of packets on the interface	Count
interface.error.packets	Number of error packets on the interface	Count
interface.sent.error.packets	Number of error packets sent on the interface	Count
interface.received.discard.packets	Number of discarded packets received on the interface	Count
interface.received.octets	Number of octets received on the interface	Count
interface.bit.type	Bit type of the interface	Count
status	Status of the interface	String
interface.out.packets	Number of outgoing packets on the interface	Count
interface.operational.status	Operational status of the interface	String
interface.admin.status	Admin status of the interface	Count
interface.sent.octets	Number of octets sent on the interface	Count
interface.last.change	Last change of the interface	String
interface.received.error.packets	Number of error packets received on the interface	Count
interface.discard.packets	Number of discarded packets on the interface	Count
started.time	Uptime of the interface	String
started.time.sec	Uptime in seconds of the interface	String
ups.load	The load on the uninterruptible power supply (UPS) measured as a percentage of its maximum capacity.	Percentage
ups.charge	The current charge level of the UPS battery.	Percentage
ups.input.line.voltage	The voltage of the input power line feeding the UPS.	Voltage
ups.output.line.voltage	The voltage of the output power line from the UPS.	Voltage
ups.output.current	The current flowing through the UPS output line.	Current
ups.sensor.status	Status of the sensors in the UPS.	Status
ups.sensor.communications.status	Status of communication with the UPS sensors.	Status
ups.battery.last.replace.date	The date when the UPS battery was last replaced.	Date
ups.last.self.test.date	The date when the last self-test was performed on the UPS.	Date
ups.battery.status	The status of the UPS battery (e.g., charging, discharging, fully charged).	Status
ups.battery.temperature	The temperature of the UPS battery.	Temperature
ups.battery.replace	Whether the UPS battery needs replacement.	Status
ups.input.voltage	The voltage of the input power to the UPS.	Voltage
ups.external.batteries.infected	Status of external batteries connected to the UPS.	Status
ups.comm.status	The communication status of the UPS.	Status
ups.last.self.test.result	Result of the last self-test performed on the UPS.	Result
ups.output.status	The status of the UPS output (e.g., on, off).	Status
ups.basic.battery.time.on.battery	The estimated remaining runtime of the UPS battery.	Time
ups.input.frequency	The frequency of the input power line feeding the UPS.	Frequency
ups.reason.for.last.transfer	Reason for the last power transfer.	Reason
ups.battery.runtime.remain	The remaining runtime of the UPS battery.	Time
ups.output.voltage	The voltage of the output power line from the UPS.	Voltage
ups.input.source	The source of input power for the UPS.	Source
ups.time.remaining	The estimated remaining time on battery power.	Time
ups.battery.current	The current flowing into or out of the UPS battery.	Current
ups.backup.time.remaining	The estimated remaining backup time for the UPS.	Time
ups.output.load	The load on the output power line from the UPS.	Percentage
ups.temperature	The temperature of the UPS.	Temperature
ups.battery.power.consumed	The power consumed by the UPS battery.	Power
ups.number.transients	The number of transients experienced by the UPS.	Count
ups.battery.voltage	The voltage of the UPS battery.	Voltage
ups.output.frequency	The frequency of the output power line from the UPS.	Frequency
ups.inverter.state	The state of the UPS inverter (e.g., on, off).	Status
ups.output.power	The power delivered by the UPS output.	Power
ups.bypass.state	The state of the UPS bypass (e.g., on, off).	Status
ups.battery.time.remaining	The estimated remaining runtime of the UPS battery.	Time
ups.charge.remaining.percent	The percentage of remaining charge on the UPS battery.	Percentage
ups.elapsed.time.on.battery	The total elapsed time that the UPS has been on battery power.	Time
ups.battery.installed	Whether the UPS battery is installed.	Status