American Power Conversion
Overview
American Power Conversion (APC) UPS, the reliable and high-performance uninterruptible power supply solutions by APC, seamlessly integrate with Motadata AIOps to provide comprehensive monitoring and management capabilities. With this integration, organizations gain real-time visibility into the performance and health of their APC UPS devices. Monitor critical UPS metrics such as battery status, load levels, and input/output voltage to ensure continuous and reliable power protection.
Prerequisites
Refer Adding network devices for monitoring to understand the prerequisites necessary for monitoring a network device.
List of Supported KPIs
| Metrics | Description | Type |
|---|---|---|
| ping.min.latency.ms | Minimum latency (in milliseconds) observed during ping | Count |
| ping.received.packets | Number of packets received during ping | Count |
| ping.lost.packets | Number of packets lost during ping | Count |
| ping.max.latency.ms | Maximum latency (in milliseconds) observed during ping | Count |
| object.target | Target object identifier | String |
| ping.sent.packets | Number of packets sent during ping | Count |
| ping.packet.lost.percent | Percentage of packet loss during ping | Percent |
| ping.latency.ms | Average latency (in milliseconds) observed during ping | Count |
| system.oid | System Object Identifier | String |
| started.time.sec | Uptime in Seconds for the monitor | Count |
| started.time | Uptime of the monitor | String |
| object.name | Name of the monitor | String |
| system.location | Location of the monitor | String |
| system.description | Description of the monitor | String |
| correlation.metrics | Correlation metrics between network connections | String |
| network.connection.tcp.connections | Number of TCP connections | Count |
| network.connection.udp.connections | Number of UDP connections | Count |
| network.connection.udp.error.segments | Number of UDP error segments | Count |
| network.connection.tcp.error.segments | Number of TCP error segments | Count |
| network.connection.tcp.retransmitted.segments | Number of TCP retransmitted segments | Count |
| destination.ip | Destination IP address | String |
| destination.port | Destination port number | Count |
| network.connection.protocol | Protocol used for network connection | Count |
| network.connection.state | State of the network connection | String |
| source.ip | Source IP address | String |
| source.port | Source port number | Count |
| interface.sent.discard.packets | Number of discarded packets sent on the interface | Count |
| interface.in.packets | Number of incoming packets on the interface | Count |
| interface.packets | Number of packets on the interface | Count |
| interface.error.packets | Number of error packets on the interface | Count |
| interface.sent.error.packets | Number of error packets sent on the interface | Count |
| interface.received.discard.packets | Number of discarded packets received on the interface | Count |
| interface.received.octets | Number of octets received on the interface | Count |
| interface.bit.type | Bit type of the interface | Count |
| status | Status of the interface | String |
| interface.out.packets | Number of outgoing packets on the interface | Count |
| interface.operational.status | Operational status of the interface | String |
| interface.admin.status | Admin status of the interface | Count |
| interface.sent.octets | Number of octets sent on the interface | Count |
| interface.last.change | Last change of the interface | String |
| interface.received.error.packets | Number of error packets received on the interface | Count |
| interface.discard.packets | Number of discarded packets on the interface | Count |
| started.time | Uptime of the interface | String |
| started.time.sec | Uptime in seconds of the interface | String |
| ups.load.percent | The percentage of UPS load, representing the amount of power being drawn from the UPS. | Percentage |
| ups.battery.capacity.percent | The percentage of UPS battery capacity remaining, indicating the current charge level of the battery. | Percentage |
| ups.input.voltage.volt | The input voltage supplied to the UPS, representing the voltage received from the power source. | Voltage (Volt) |
| ups.output.voltage.volt | The output voltage delivered by the UPS to connected devices, ensuring a stable power supply. | Voltage (Volt) |
| ups.output.current.ampere | The output current provided by the UPS to connected devices, indicating the electrical current flowing through the circuit. | Current (Ampere) |
| ups.battery.last.replace.date | The date of the last battery replacement, providing information on the UPS battery's maintenance history. | Date |
| ups.last.self.test.date | The date of the last self-test performed by the UPS to assess its operational status. | Date |
| ups.battery.status | The status of the UPS battery, such as "Normal," "Low," or "Unknown," indicating its health and condition. | String |
| ups.battery.temperature.celsius | The temperature of the UPS battery in Celsius, offering insights into its thermal condition. | Temperature (Celsius) |
| ups.battery.replacement.status | Indicates whether UPS battery replacement is required or not, helping with maintenance planning. | String |
| ups.bad.external.battery.packs | The count of bad external battery packs connected to the UPS. | Count |
| ups.last.self.test.result | The result of the last self-test performed by the UPS, providing information about its operational integrity. | String |
| ups.status | The status of the UPS, indicating whether it is online, on battery power, in bypass mode, or undergoing maintenance. | String |
| ups.battery.runtime.elapsed.seconds | The elapsed runtime of the UPS on battery power, measuring how long the UPS has been operating without external power. | Time (Seconds) |
| ups.input.frequency.hz | The input frequency supplied to the UPS, indicating the frequency of the power source. | Frequency (Hz) |
| ups.output.frequency.hz | The output frequency delivered by the UPS to connected devices. | Frequency (Hz) |
| ups.battery.transfer.reason | The reason for the last battery transfer, indicating events like voltage fluctuations or self-tests triggering a battery switchover. | String |
| ups.battery.runtime.remaining.seconds | The remaining runtime of the UPS battery, indicating how much time is left before the UPS switches back to the main power source. | Time (Seconds) |
| ups.temperature | The temperature of the UPS, providing information about its thermal conditions. | Temperature |
| ups.battery.power.consumed | The amount of power consumed by the UPS battery, indicating its energy consumption. | Count |
| ups.number.transients | The count of transients experienced by the UPS, which are short-duration voltage fluctuations. | Count |
| ups.battery.voltage | The voltage of the UPS battery, indicating its current electrical potential. | Voltage (Volt) |
| ups.input.voltage | The input voltage supplied to the UPS, representing the voltage received from the power source. | Voltage (Volt) |
| ups.output.frequency | The output frequency delivered by the UPS to connected devices. | Frequency |
| ups.inverter.state | The state of the UPS inverter, providing information about its operational mode, such as "On," "Off," or "Standby." | String |
| ups.battery.current | The current flowing through the UPS battery, indicating the electrical current within the battery circuit. | Current |
| ups.output.power | The power output of the UPS, indicating the amount of power supplied to connected devices. | Power |
| ups.bypass.state | The state of the UPS bypass, indicating whether the bypass is active or not. | String |
| ups.battery.time.remaining | The remaining time of UPS battery backup, indicating the duration for which the UPS can sustain power without external supply. | Time |
| ups.output.load | The load connected to the UPS, indicating the power being drawn by connected devices. | Load |
| ups.inverter.temperature | The temperature of the UPS inverter, providing information about its thermal conditions. | Temperature |
| ups.battery.sys.shutdown.duration | The duration of the UPS battery system shutdown, indicating how long the UPS remained off during a shutdown. | Time |
| ups.battery.installed | Indicates whether a battery is installed in the UPS or not. | String |
| ups.load | The load on the UPS, indicating the amount of power being drawn from the UPS. | Load |
| ups.charge | The charge level of the UPS battery, indicating its current capacity. | Percentage |
| ups.battery.voltage | The voltage of the UPS battery, indicating its current electrical potential. | Voltage |
| ups.output.load.rate | The rate of UPS output load, providing insights into load fluctuations. | Load rate |
| ups.battery.capacity | The capacity of the UPS battery, indicating its total energy storage capacity. | Capacity |