Netgear
Overview
Netgear Switch, the reliable and user-friendly network switch solutions by Netgear, seamlessly integrate with Motadata AIOps to provide comprehensive monitoring and management capabilities. With this integration, organizations gain real-time visibility into the performance and health of their Netgear Switches. Monitor critical network switch metrics such as port utilization, link status, and traffic patterns to ensure smooth and efficient network operation.
Prerequisites
Refer Adding network devices for monitoring to understand the prerequisites necessary for monitoring a network device.
List of Supported KPIs
| Metrics | Description | Type |
|---|---|---|
| ping.min.latency.ms | Minimum latency (in milliseconds) observed during ping | Count |
| ping.received.packets | Number of packets received during ping | Count |
| ping.lost.packets | Number of packets lost during ping | Count |
| ping.max.latency.ms | Maximum latency (in milliseconds) observed during ping | Count |
| object.target | Target object identifier | String |
| ping.sent.packets | Number of packets sent during ping | Count |
| ping.packet.lost.percent | Percentage of packet loss during ping | Percent |
| ping.latency.ms | Average latency (in milliseconds) observed during ping | Count |
| system.oid | System Object Identifier | String |
| started.time.sec | Uptime in Seconds for the monitor | Count |
| started.time | Uptime of the monitor | String |
| object.name | Name of the monitor | String |
| system.location | Location of the monitor | String |
| system.description | Description of the monitor | String |
| correlation.metrics | Correlation metrics between network connections | String |
| network.connection.tcp.connections | Number of TCP connections | Count |
| network.connection.udp.connections | Number of UDP connections | Count |
| network.connection.udp.error.segments | Number of UDP error segments | Count |
| network.connection.tcp.error.segments | Number of TCP error segments | Count |
| network.connection.tcp.retransmitted.segments | Number of TCP retransmitted segments | Count |
| destination.ip | Destination IP address | String |
| destination.port | Destination port number | Count |
| network.connection.protocol | Protocol used for network connection | Count |
| network.connection.state | State of the network connection | String |
| source.ip | Source IP address | String |
| source.port | Source port number | Count |
| interface.sent.discard.packets | Number of discarded packets sent on the interface | Count |
| interface.in.packets | Number of incoming packets on the interface | Count |
| interface.packets | Number of packets on the interface | Count |
| interface.error.packets | Number of error packets on the interface | Count |
| interface.sent.error.packets | Number of error packets sent on the interface | Count |
| interface.received.discard.packets | Number of discarded packets received on the interface | Count |
| interface.received.octets | Number of octets received on the interface | Count |
| interface.bit.type | Bit type of the interface | Count |
| status | Status of the interface | String |
| interface.out.packets | Number of outgoing packets on the interface | Count |
| interface.operational.status | Operational status of the interface | String |
| interface.admin.status | Admin status of the interface | Count |
| interface.sent.octets | Number of octets sent on the interface | Count |
| interface.last.change | Last change of the interface | String |
| interface.received.error.packets | Number of error packets received on the interface | Count |
| interface.discard.packets | Number of discarded packets on the interface | Count |
| started.time | Uptime of the interface | String |
| started.time.sec | Uptime in seconds of the interface | String |
| system.disk.id | The ID of the disk on the SNMP device. | string |
| system.disk.number | The disk number on the SNMP device. | count |
| system.disk.slot.name | The name of the slot where the disk is located on the SNMP device. | string |
| system.disk.serial.number | The serial number of the disk on the SNMP device. | string |
| system.disk.model | The model of the disk on the SNMP device. | string |
| system.disk.capacity.bytes | The capacity of the disk in bytes on the SNMP device. | count |
| system.disk.connected.interface | The interface to which the disk is connected on the SNMP device. | string |
| system.disk.state | The state of the disk on the SNMP device. | string |
| fan.sensor | The fan sensor value on the SNMP device. | count |
| fan.sensor.speed.rpm | The speed of the fan sensor in RPM on the SNMP device. | count |
| fan.sensor.status | The status of the fan sensor on the SNMP device. | string |
| fan.sensor.type | The type of the fan sensor on the SNMP device. | string |
| temperature.sensor | The temperature sensor value on the SNMP device. | count |
| temperature.sensor.value.fahrenheit | The temperature sensor value in degrees Fahrenheit on the SNMP device. | count |
| temperature.sensor.type | The type of the temperature sensor on the SNMP device. | string |
| temperature.sensor.minimum.unit.fahrenheit | The minimum temperature unit in degrees Fahrenheit on the SNMP device. | count |
| temperature.sensor.maximum.unit.fahrenheit | The maximum temperature unit in degrees Fahrenheit on the SNMP device. | count |
| netgear.volume.number | The number of the volume on the SNMP device. | count |
| netgear.volume.name | The name of the volume on the SNMP device. | string |
| netgear.volume.raid.level | The RAID level of the volume on the SNMP device. | string |
| netgear.volume.status | The status of the volume on the SNMP device. | string |
| netgear.volume.capacity.bytes | The capacity of the volume in bytes on the SNMP device. | count |
| netgear.volume.free.bytes | The amount of free space in bytes on the SNMP device. | count |
| netgear.disk.number | The number of the NAS disk on the SNMP device. | count |
| netgear.disk.channel | The channel of the NAS disk on the SNMP device. | string |
| netgear.disk.model | The model of the NAS disk on the SNMP device. | string |
| netgear.disk.state | The state of the NAS disk on the SNMP device. | string |
| netgear.hardware.fan.sensor | The NAS fan sensor on the SNMP device. | count |
| netgear.hardware.fan.sensor.speed.rpm | The speed of the NAS fan sensor in RPM on the SNMP device. | count |
| netgear.hardware.fan.sensor.type | The type of the NAS fan sensor on the SNMP device. | string |
| power.supply.sensor | The power supply sensor on the SNMP device. | count |
| power.supply.sensor.description | The description of the power supply sensor on the SNMP device. | string |
| power.supply.sensor.status | The status of the power supply sensor on the SNMP device. | string |
| netgear.hardware.temperature.sensor.number | The number of the NAS temperature sensor on the SNMP device. | count |
| netgear.hardware.temperature.sensor.value.celsius | The temperature value of the NAS sensor in degrees Celsius. | count |
| netgear.hardware.temperature.sensor.status | The status of the NAS temperature sensor on the SNMP device. | string |
| netgear.nas.volume | The number of the NAS volume on the SNMP device. | count |
| netgear.nas.volume.name | The name of the NAS volume on the SNMP device. | string |
| netgear.nas.volume.raid.level | The RAID level of the NAS volume on the SNMP device. | string |
| netgear.nas.volume.status | The status of the NAS volume on the SNMP device. | string |
| netgear.nas.volume.capacity.bytes | The capacity of the NAS volume in bytes on the SNMP device. | count |
| netgear.nas.volume.free.bytes | The amount of free space in bytes on the NAS volume. | count |
| system.cpu.index | The index of the CPU process on the SNMP device. | count |
| system.cpu.process.name | The name of the CPU process on the SNMP device. | string |
| system.cpu.used.percent | The percentage of CPU usage for the CPU process on the SNMP device. | count |
| system.cpu.percent | The overall percentage of CPU usage on the SNMP device. | count |
| system.memory.available.bytes | The amount of available memory in bytes on the SNMP device. | count |
| system.memory.capacity.bytes | The total capacity of memory in bytes on the SNMP device. | count |
| system.memory.used.bytes | The amount of used memory in bytes on the SNMP device. | count |
| system.memory.used.percent | The percentage of memory usage on the SNMP device. | count |
| vlan.name | The name of the VLAN. | String |
| vlan.status | The status of the VLAN. | String |
| vlan | The VLAN identifier. | String |
| vlan.ports | The list of ports associated with the VLAN. | String |
| vlan.port | The specific port associated with the VLAN. | String |