Radware
Overview
Radware Switch, the advanced and high-performance network switch solutions by Radware, seamlessly integrate with Motadata AIOps to provide comprehensive monitoring and management capabilities. With this integration, organizations gain real-time visibility into the performance and health of their Radware Switches. Monitor critical network switch metrics such as port utilization, link status, and traffic patterns to ensure smooth and efficient network operation.
Prerequisites
Refer Adding network devices for monitoring to understand the prerequisites necessary for monitoring a network device.
List of Supported KPIs
| Metrics | Description | Type |
|---|---|---|
| ping.min.latency.ms | Minimum latency (in milliseconds) observed during ping | Count |
| ping.received.packets | Number of packets received during ping | Count |
| ping.lost.packets | Number of packets lost during ping | Count |
| ping.max.latency.ms | Maximum latency (in milliseconds) observed during ping | Count |
| object.target | Target object identifier | String |
| ping.sent.packets | Number of packets sent during ping | Count |
| ping.packet.lost.percent | Percentage of packet loss during ping | Percent |
| ping.latency.ms | Average latency (in milliseconds) observed during ping | Count |
| system.oid | System Object Identifier | String |
| started.time.sec | Uptime in Seconds for the monitor | Count |
| started.time | Uptime of the monitor | String |
| object.name | Name of the monitor | String |
| system.location | Location of the monitor | String |
| system.description | Description of the monitor | String |
| correlation.metrics | Correlation metrics between network connections | String |
| network.connection.tcp.connections | Number of TCP connections | Count |
| network.connection.udp.connections | Number of UDP connections | Count |
| network.connection.udp.error.segments | Number of UDP error segments | Count |
| network.connection.tcp.error.segments | Number of TCP error segments | Count |
| network.connection.tcp.retransmitted.segments | Number of TCP retransmitted segments | Count |
| destination.ip | Destination IP address | String |
| destination.port | Destination port number | Count |
| network.connection.protocol | Protocol used for network connection | Count |
| network.connection.state | State of the network connection | String |
| source.ip | Source IP address | String |
| source.port | Source port number | Count |
| interface.sent.discard.packets | Number of discarded packets sent on the interface | Count |
| interface.in.packets | Number of incoming packets on the interface | Count |
| interface.packets | Number of packets on the interface | Count |
| interface.error.packets | Number of error packets on the interface | Count |
| interface.sent.error.packets | Number of error packets sent on the interface | Count |
| interface.received.discard.packets | Number of discarded packets received on the interface | Count |
| interface.received.octets | Number of octets received on the interface | Count |
| interface.bit.type | Bit type of the interface | Count |
| status | Status of the interface | String |
| interface.out.packets | Number of outgoing packets on the interface | Count |
| interface.operational.status | Operational status of the interface | String |
| interface.admin.status | Admin status of the interface | Count |
| interface.sent.octets | Number of octets sent on the interface | Count |
| interface.last.change | Last change of the interface | String |
| interface.received.error.packets | Number of error packets received on the interface | Count |
| interface.discard.packets | Number of discarded packets on the interface | Count |
| started.time | Uptime of the interface | String |
| started.time.sec | Uptime in seconds of the interface | String |
| system.serial.no | The serial number of the SNMP device. | string |
| system.hardware.version | The hardware version of the SNMP device. | string |
| active.sessions | The number of active sessions on the SNMP device. | count |
| http.1.0.connections | The number of HTTP 1.0 connections on the SNMP device. | count |
| http.1.1.connections | The number of HTTP 1.1 connections on the SNMP device. | count |
| http.2.0.connections | The number of HTTP 2.0 connections on the SNMP device. | count |
| http.transactions.per.sec | The rate of HTTP transactions per second on the SNMP device. | count |
| http.1.1.requests | The number of HTTP 1.1 requests on the SNMP device. | count |
| http.1.0.requests | The number of HTTP 1.0 requests on the SNMP device. | count |
| http.2.0.requests | The number of HTTP 2.0 requests on the SNMP device. | count |
| power.supply.sensor.status | The status of the power supply sensor on the SNMP device. | string |
| fan.sensor.status | The status of the fan sensor on the SNMP device. | string |
| temperature.sensor.status | The status of the temperature sensor on the SNMP device. | string |
| system.memory.stats | The memory statistics of the SNMP device. | count |
| system.memory.free.stats | The free memory statistics of the SNMP device. | count |
| system.memory.used.percent | The percentage of used memory on the SNMP device. | count |
| system.memory.capacity.bytes | The capacity of memory in bytes on the SNMP device. | count |
| system.memory.configured.bytes | The configured memory in bytes on the SNMP device. | count |
| system.switch.processor | The processor used by the switch on the SNMP device. | count |
| system.memory.initial.free.bytes | The initial free memory in bytes on the SNMP device. | count |
| system.memory.cached.bytes | The cached memory in bytes on the SNMP device. | count |
| management.processor.cpu.percent | The CPU percentage used by the management processor on the SNMP device. | count |
| management.processor.4sec.avg.cpu.percent | The 4-second average CPU percentage used by the management processor. | count |
| management.processor.64sec.avg.cpu.percent | The 64-second average CPU percentage used by the management processor. | count |
| management.processor.virtual.memory.bytes | The virtual memory in bytes used by the management processor. | count |
| management.processor.resident.memory.bytes | The resident memory in bytes used by the management processor. | count |
| switch.processor.cpu.percent | The CPU percentage used by the switch processor on the SNMP device. | count |
| switch.processor.4sec.avg.cpu.percent | The 4-second average CPU percentage used by the switch processor. | count |
| switch.processor.64sec.avg.cpu.percent | The 64-second average CPU percentage used by the switch processor. | count |
| vlan.name | The name of the VLAN. | String |
| vlan.status | The status of the VLAN. | String |
| vlan | The VLAN identifier. | String |
| vlan.ports | The list of ports associated with the VLAN. | String |
| vlan.port | The specific port associated with the VLAN. | String |