Arris Interactive
Overview
Valere Power UPS, the reliable and high-performance uninterruptible power supply solutions by Valere Power, seamlessly integrate with Motadata AIOps to provide comprehensive monitoring and management capabilities. With this integration, organizations gain real-time visibility into the performance and health of their Valere Power UPS devices. Monitor critical UPS metrics such as battery status, load levels, and input/output voltage to ensure continuous and reliable power protection.
Prerequisites
Refer Adding network devices for monitoring to understand the prerequisites necessary for monitoring a network device.
List of Supported KPIs
| Metrics | Description | Type |
|---|---|---|
| ping.min.latency.ms | Minimum latency (in milliseconds) observed during ping | Count |
| ping.received.packets | Number of packets received during ping | Count |
| ping.lost.packets | Number of packets lost during ping | Count |
| ping.max.latency.ms | Maximum latency (in milliseconds) observed during ping | Count |
| object.target | Target object identifier | String |
| ping.sent.packets | Number of packets sent during ping | Count |
| ping.packet.lost.percent | Percentage of packet loss during ping | Percent |
| ping.latency.ms | Average latency (in milliseconds) observed during ping | Count |
| system.oid | System Object Identifier | String |
| started.time.sec | Uptime in Seconds for the monitor | Count |
| started.time | Uptime of the monitor | String |
| object.name | Name of the monitor | String |
| system.location | Location of the monitor | String |
| system.description | Description of the monitor | String |
| correlation.metrics | Correlation metrics between network connections | String |
| network.connection.tcp.connections | Number of TCP connections | Count |
| network.connection.udp.connections | Number of UDP connections | Count |
| network.connection.udp.error.segments | Number of UDP error segments | Count |
| network.connection.tcp.error.segments | Number of TCP error segments | Count |
| network.connection.tcp.retransmitted.segments | Number of TCP retransmitted segments | Count |
| destination.ip | Destination IP address | String |
| destination.port | Destination port number | Count |
| network.connection.protocol | Protocol used for network connection | Count |
| network.connection.state | State of the network connection | String |
| source.ip | Source IP address | String |
| source.port | Source port number | Count |
| interface.sent.discard.packets | Number of discarded packets sent on the interface | Count |
| interface.in.packets | Number of incoming packets on the interface | Count |
| interface.packets | Number of packets on the interface | Count |
| interface.error.packets | Number of error packets on the interface | Count |
| interface.sent.error.packets | Number of error packets sent on the interface | Count |
| interface.received.discard.packets | Number of discarded packets received on the interface | Count |
| interface.received.octets | Number of octets received on the interface | Count |
| interface.bit.type | Bit type of the interface | Count |
| status | Status of the interface | String |
| interface.out.packets | Number of outgoing packets on the interface | Count |
| interface.operational.status | Operational status of the interface | String |
| interface.admin.status | Admin status of the interface | Count |
| interface.sent.octets | Number of octets sent on the interface | Count |
| interface.last.change | Last change of the interface | String |
| interface.received.error.packets | Number of error packets received on the interface | Count |
| interface.discard.packets | Number of discarded packets on the interface | Count |
| started.time | Uptime of the interface | String |
| started.time.sec | Uptime in seconds of the interface | String |
| ups.load | The load on the UPS (Uninterruptible Power Supply). | percentage |
| ups.charge | The charge level of the UPS battery. | percentage |
| ups.input.line.voltage | The input line voltage of the UPS. | count |
| ups.output.line.voltage | The output line voltage of the UPS. | count |
| ups.output.current | The current output of the UPS. | count |
| ups.sensor.status | The status of the UPS sensor. | string |
| ups.sensor.communications.status | The communication status of the UPS sensor. | string |
| ups.battery.last.replace.date | The date when the UPS battery was last replaced. | string |
| ups.last.self.test.date | The date of the last self-test performed on the UPS. | string |
| ups.battery.status | The status of the UPS battery. | string |
| ups.battery.temperature | The temperature of the UPS battery. | count |
| ups.battery.replace | Indicates whether the UPS battery needs replacement. | string |
| ups.input.voltage | The input voltage of the UPS. | count |
| ups.external.batteries.infected | Indicates if external batteries are infected. | string |
| ups.comm.status | The communication status of the UPS. | count |
| ups.reason.for.last.transfer | The reason for the last transfer of power source. | string |
| ups.battery.runtime.remain | The remaining runtime of the UPS battery. | count |
| ups.output.voltage | The output voltage of the UPS. | count |
| ups.battery.time.on.battery | The time the UPS battery can last on battery power. | count |
| ups.input.frequency | The input frequency of the UPS. | count |
| ups.output.status | The status of the UPS output. | string |
| ups.input.source | The source of input for the UPS. | string |
| ups.time.remaining | The remaining time of the UPS. | count |
| ups.battery.current | The current of the UPS battery. | count |
| ups.backup.time.remaining | The remaining backup time of the UPS. | count |
| ups.output.load | The load on the UPS output. | percentage |
| ups.temperature | The temperature of the UPS. | count |
| ups.battery.power.consumed | The power consumed by the UPS battery. | count |
| ups.number.transients | The number of transients experienced by the UPS. | count |
| ups.battery.voltage | The voltage of the UPS battery. | count |
| ups.output.frequency | The output frequency of the UPS. | count |
| ups.inverter.state | The state of the UPS inverter. | string |
| ups.output.power | The power output of the UPS. | count |
| ups.bypass.state | The state of UPS bypass. | string |
| ups.output.load.rate | The rate of UPS output load. | percentage |
| ups.battery.capacity | The capacity of the UPS battery. | percentage |
| ups.battery.positive.voltage | The positive voltage of the UPS battery. | count |
| ups.battery.negative.voltage | The negative voltage of the UPS battery. | count |
| ups.elapsed.time.on.battery | The elapsed time the UPS has been on battery power. | count |
| ups.charge.remaining.percent | The remaining charge percentage of the UPS battery. | percentage |
| ups.battery.installed | Indicates whether the UPS battery is installed. | string |
| ups.output.current | The current output of the UPS. | count |
| ups.battery.sys.shutdown.duration | The duration of the UPS system shutdown. | count |
| ups.load | The load on the UPS (Uninterruptible Power Supply). | percentage |
| ups.charge | The charge level of the UPS battery. | percentage |
| ups.battery.status | The status of the UPS battery. | string |
| ups.battery.voltage | The voltage of the UPS battery. | count |
| ups.output.load.rate | The rate of UPS output load. | percentage |
| ups.battery.capacity | The capacity of the UPS battery. | percentage |