Skip to main content
Version: 8.5.0

Wake On LAN Schedules List Page

The Wake On LAN Schedules list page helps the technicians to track and manage all the schedules. It displays a list of schedules along with the options like enable/disable, create, settings, edit, and delete at one place.

To view the Wake On LAN Schedules list page, navigate to Admin > Asset Management > Wake On LAN, and the below page appears.

Wake On LAN Schedules List Page

Here, you can do the following:

  • Create WOL Schedule: You can create a new schedule.
  • Settings: You can configure the settings for Wake On LAN Schedule.
  • Enable or Disable: You can enable or disable the Wake On LAN Schedule. By default, it is enabled.
  • Edit: You can edit the details of the Wake On LAN Schedule.
  • Delete: You can delete the Wake On LAN Schedule. A confirmation message appears. Click Yes to continue or Cancel to stop the process.

Settings​

To configure the settings, click the Settings button and a popup appears.

Wake On LAN Settings Popup

Enter the below details:

  • Waiting Time for Machine Boot: Set the time till which a response is awaited from the remote machine. You can set the time from 5 to 60 minutes. The default value is 5 minutes.
  • WOL Port: Enter the port number on which WOL is configured. The default value is 6 or 7. You can use other port number as well.
note

With proper MAC Address, IP Address, and Subnet details configured, the computer will wake up though a different WOL port number is set.

Once done, click Save to save the settings.