Juniper EX2300, EX3400, and EX4300 Switches(sFlow) Configuration

This document provides the configuration steps for sFlow in Juniper EX2300, EX3400, and EX4300 switches.

Configuration Steps

Enter the configuration mode and Set the sFlow collector:

set sflow collector {MOTADATA_SERVER_IP} udp-port 6343

Enter global configuration mode on the router or MSFC, and issue the following commands for each interface on which you want to enable flow:

set sflow interfaces {INTERFACE_NAME}
set sflow polling-interval 20
set sflow sample-rate 1000

After completing the configuration, navigate to Menu > Flow Explorer and select the Event Source(s) and the associated Interface(s) from the drop-downs to view the active flow data.