SSH NCM CollectorΒΆ

  • Version: 4.7

  • Compatibility: Motadata v7.7.5

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs Configuration backup, Restore, Action(updating configuration), compliance and firmware upgrade on Network devices.

  • Change from Last Version: : Improved Support of SFTP and SCP protocol is added for NCM discovery/Backup/actions

  • Version: 4.6

  • Compatibility: Motadata v7.7.4

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs Configuration backup, Restore, Action(updating configuration), compliance and firmware upgrade on Network devices.

  • Change from Last Version: Firmware upgrade for HP and Aruba devices is added

  • Version: 4.5

  • Compatibility: Motadata v7.7.3

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs Configuration backup, Restore, Action(updating configuration), compliance and firmware upgrade on Network devices.

  • Change from Last Version: Improved Firmware upgrade operation with python worker for cisco devices.

  • Version: 4.4

  • Compatibility: Motadata v7.7.2

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from Last Version: Error code based error output will be displayed

  • Version: 4.3

  • Compatibility: Motadata v7.7.0

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from Last Version: Improvement: GUI changes, new parameters added for device discovery, default copy command timeout

  • Version: 4.2

  • Compatibility: Motadata v7.6.8

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from Last Version: Improvement: Test Methods added for Demo Server

  • Version: 4.1

  • Compatibility: Motadata v7.6.8

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from last version: New Feature: Monitor wise timeout added

  • Version: 4.0

  • Compatibility: Motadata v7.6.8

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from last version: New Feature: Added pdf format for saving backup

  • Version: 3.9

  • Compatibility: Motadata v7.6.7

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from last version: Improvement: Multiple devices are supported for discovery and backup.

  • Version: 3.8

  • Compatibility: Motadata v7.6.6

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from last version: Bug Fix: Delay added for reading the backup file.

  • Version: 3.7

  • Compatibility: Motadata v7.6.5

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from last version: New Feature: Added NCM Configurations

  • Version: 3.5

  • Compatibility: Motadata v7.6.4

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from last version: New Feature: Support of Software Image and SMU added

  • Version: 3.4

  • Compatibility: Motadata v7.6.4

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from last version: Bug Fix: SSH Error resolved

  • Version: 2.8

  • Compatibility: Motadata v7.6.0

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.

  • Change from last version: Bug Fix: Automatic backup was not working for all devices

  • Version: 2.7

  • Compatibility: Motadata v7.5.3

  • Requires: Vendor (Mandatory), Device Type (Mandatory), Port (Mandatory), Username (Mandatory), Password (Mandatory), Enable Username (Optional), Enable Password (Optional), Pseudo Terminal (Mandatory), Exit Command (Mandatory), Prompt (Mandatory), Enable Prompt (Optional), Protocol (Mandatory), Config Password (Optional), VRF Name (Optional), Timeout (Optional)

  • Operation: Performs the operations on NCM devices using SSH technology.